USR805453 Professional Access Point

(USR805453, 64-805453-00, 5453)

5453
moreClick for more product images

Warranty: 2 Years

FAQs

  • Repair Information
  • How do I connect using the built in Radius server?
  • What is my default Login and Password?
  • Wireless LANs – Are They Safe?
  • Wireless range performance

    • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USRobotics Help Desk Technician directly.

    		Note: In order to prevent your browser from trying to open these files, right-click the file and select Save Target As... to download.

    Manuals and other Documents

    Troubleshooting

    Firmware

    Firmware version 1.2.9
    Upgrade procedures:
    1. Download this file to a temporary location on your computer's hard disk drive.
    2. To upgrade your Professional Access Point with all operating systems, open an Internet browser and enter the access point's IP address.
      Note: If you do not know your access points IP address, follow the instructions described in the Quick Installation Guide. By default the IP address of the access point is 192.168.1.10.
    3. Enter your User name and Password. Click OK.
    4. Navigate to Advanced menu’s Upgrade tab.
    5. If you know the path to the New Firmware Image file, enter it in the textbox. Otherwise, click the Browse button and locate the firmware image file.
    6. Click Update to apply new firmware image. A confirmation window describes the upgrade process.
    7. Click OK to confirm the upgrade and start the process. When the upgrade is complete the Web User Interface redisplays the Upgrade firmware page.
    8. It is recommended you do a factory reset (Advanced Menu, Reset Configuration)
    5453-1.2.9-upgrade.tar 4.4 MB 25-07-06
    usr5453-releasenotes-129.txt 1 KB 27-07-06
    Professional Access Point Detection Utility
    This will extract the Professional Access Point Detection Utility for the USR5453 to c:\KickStart.
    To launch the Professional Access Point Detection Utility from the Run... command in Windows, type c:\kickstart\kickstart.bat
    KickStart.exe 12.4 MB 24-03-06
    GPL Source Code
    The GPL Source Code contained in this product is available as a free download from the GPL Code Central

    Archive

    Original Firmware version 1.1.23
    5453_1.1.23.tar 4.3 MB 02-02-06

    Tech Support via E-mail E-mail a USRobotics Support Technician.

    Product Registration Activate your USRobotics product warranty online.